====================================
LAPIDARY ARTS and FACETERS DIGEST

committed to carrying on the fine works started
by Hale Sweeny and Jerry Dewbre
====================================
Issue No.21 - Thursday December 5, 2002
====================================
Click a link below to post to the list:
for faceting questions faceters@caprock-spur.com
for lapidary questions lapidary@caprock-spur.com
====================================
List Posting Guidelines and rules can be found at:
http://www.gemcutters.org/rules.htm
====================================
Web Site http://www.gemcutters.org
Archives: http://www.gemcutters.org/archives.htm
====================================
Published Monday thru Friday, except holidays
from Spur,Texas
====================================
The Lapidary Arts Digest is moderated by:
Thurmond Moore III & Fred Ward (Gemology)
====================================
From the Moderator: No message today.
====================================
Index to Today's Digest

Faceting Messages:
--------------
01 Re: Beale wooley setup on an ultra-tec
02 Re: Beale wooley setup on an ultra-tec
03 For sale
04 For sale

Business Section - No messages today.
====================================
LAPIDARY DISCUSSION:


Message:01

Subject: Re: Issue No.20 - Tuesday December 4, 2002
Date: Wed, 4 Dec 2002 15:11:50 EST
To: lapidary@caprock-spur.com
From: Cutugem@aol.com

Roy, The Beale wooley setup on an ultra-tec is a thirty second snap. All you
need is a multi meter that reads resistance and two leads. If you have
trouble just email me off list. Dennis on the North Coast

_______________________________________________________________
Message:02

Subject: Ultra Tech and the B/W Depth of Cut Indicator
Date: Wed, 4 Dec 2002 21:35:35 -0500 (EST)
To: lapidary@caprock-spur.com (LapidaryArtsDigest)
From: DaveWoolley@webtv.net (Dave Woolley)

Roy,

Try an "el cheapo" Volt/Ohmmeter from
Radio Shack. Hook up the alligator clips to 1.) the body of the faceting
head and 2.) the adjustable protractor-lock finger bolt head/knurled
shaft. The finger is mounted on a plastic sleeve that just happens to
insulate it from the rest of the faceting head. Either lead to either
location - makes no difference. Just make shure that you do not make an
electron path through a bearing.

When the head drops down to the protractor-lock finger, the needle
should move from left to right on the Volt/Ohmmeter dial, set in the
Ohmmeter mode. That is the only set up test required. You still wont
believe it will work until you cut a facet; only then will the needle
move slowly across the dial.

The only suggested improvements are soldered connections such as the
leads with out the alligator clips soldered to tabs screwed or bolted on
the faceting head and under the adjustment shaft bolt head on the
protractor-lock finger, and an old style - non electronically dampened
Ohmmeter. But you will find out if you like the B/W Depth of Cut
Indicator for about $10 or $15. The un-dampened needles move a little
faster in response to lap height variations or lap wobble. In either
case you will now have an extremely accurate depth of cut Indicator that
can also be used to align you machine and to locate bad bearings, loose
stuff, and poor laps. It is the best tool you can have to maintain you
machine.

Beats the heck out of buying a strain gauge faceting machine if you
already have an Ultra Tech and probably is much more accurate when you
get the hang of using it. You will be amazed at how easy it is to do
quality faceting in 1/4 the time.

Again, see the "Beale/Woolley Depth of Cut Indicator" article (google
search) for the now required 'Beale/Woolley Faceting Technique'. If you
come up with any suggestions along the way, please let me know!

Lets us know how you do, and feel free to contact me off list if you
have problems.

Best regards,
Dave Woolley (and Marcus Beale)


_______________________________________________________________
Message:03

Subject: CLASSIFIED ADVERTISEMENTS:
Date: Wed, 4 Dec 2002 16:40:35 EST
To: lapidary@caprock-spur.com
From: ACMEMINER2@aol.com

Howdy Folks!

I have a couple items that would make a great gift for the
lapidarist/collector on your shopping list this year!

Gem display cases and a great VHS video on mining gemstones in America!
It will take you to some famous Tourmaline mines in Main and California. Red
Emerald in Utah. Sleeping Beauty mine in Arizona for Turquoise and Peridot
on the San Carlos reservation. Sunstone in Oregon and much more!

You can see my items on my specials page at this link.

http://www.topgemsgems.com/SPECIALS.html


THANK YOU....

HAPPY HOLIDAYS!

Steve

_______________________________________________________________
Message:04


Subject: Advertisement
Date: Thu, 5 Dec 2002 12:12:01 EST
To: <faceters@caprock-spur.com>
From: GEMARTSERV@aol.com

Books by Glenn and Martha Vargas : In time for CHRISTMAS

Faceting For Amateurs, Third Edtion $35
Diagrams Volume I $30
Diagrams Volume II $30
Diagrams Volume III $30
Descriptions of Gem Materials, Third Edition $25
Calif. residents please add 7.75% sales tax

Media mail rates: Fac. for Amat. $2.26
Others $1.84
Any two $3.10
Will advise on non US delivery
Contact Jerry Newman at: gemartserv@aol.com

PS regarding the Vargas Pol-A-Gem laps: They are all gone for this season.
Glenn has agreed to make more in the spring when the weather warms up in our
desert; and will make Alumina-B as well as Cerium Oxide. I will post to the
list when more become available. Thanks to all who ordered over the last few
weeks!


====================================
RESOURCES FOR LAPIDARIES ~

Hale Sweeny's Lapidary Digest Archives http://www.lapidarydigest.com/
International Lapidary Association http://www.gemcutters.org


RESOURCES FOR FACETER'S ~

Facetron: http://www.facetron.com/
Graves: http://www.rockhounds.com/graves/
MDR: http://www.mdr-facet.com/
Polymetric: http://www.polymetricinc.com/
Ultra-tec: http://www.ultratec-facet.com
Fac-Ette Manufacturing Company: (910)256-9248
http://www.fac-ette.com/ 800-336-9248.
Raytech Industries: http://www.raytech-ind.com
Rock Peddler: 1-800-416-4348 / www.rockpeddler.com

====================================

RESOURCES FOR GEMOLOGISTS ~

Accredited Gemologists Association, http://aga.polygon.net/
American Gem Society, (AGS) 702-255-6500
American Gem Trade Association, (AGTA) http://www.agta.org
Gemmological Assc. & GTL / Great Britain, http://www.gagtl.ac.uk/gagtl
Gemmological Association of Australia, http://www.gem.org.au
Gemological Institute of America, (GIA) http://www.gia.edu.giagem
International Gem Society (IGS) web site is: http://www.gemsociety.org
International Colored Gemstone Association, http://www.gemstone.org

====================================

FACETING GUILDS (Alphabetically, World) ~

*Charleston Faceting Guild, South Carolina, wmcnay@mindspring.com.
*Columbia-Willamette Faceter's Guild, http://www.facetersguild.com/
*Danish Faceters Guild, http://medlem.spray.se/danfacet/
*East/Central Florida:Tomoka Gem and Mineral Society's Faceters Guild,
Don Cameron: ghgemcutter@earthlink.net
*Eastern Mass Faceter's Group, rockpeddler@attbi.com
*Faceter's Forum Society-LaPorte, IN VESteele@aol.com
*Faceter's Guild of N. California, Wayne Meissner, lklomp@cnetech.com
*Faceter's Guild of S. California, Jerry W. Carroll, (818)348-6327
*Intermountain Faceter's Guild, Carl M. Unruh, (360)385-3753
*Midwest Faceter's Guild, E-mail: tgibbs@compuserve.com
*Mid-Williamette Faceters Guild, Albany, Oregon, Michael E. Bumcrot;
E-mail @ MBumcrot@valleyoilco.com
*Moreton Bay is a branch of the Australian Facetors' Guild, Brisbane,
Queensland. http://cwpp.slq.qld.gov.au/afg
*New Mexico Faceter's Guild, Nancy Attaway, attaway@highfiber.com
http://www.attawaygems.com/NMFG
*North Puget Sound Faceting Guild, Keith Wyman, tfw@fidalgo.net
*Tacoma Faceting Guild, Chuck Bloch chuck_b@prodigy.net
*Texas Faceter's Guild, Jill Rowlands, gemsbyj@aol.com
*Seattle Faceting Club (LeonardBahr@prodigy.net)
*United States Faceting Guild (Keith Wyman, tfw@fidalgo.net)
http://www.usfacetersguild.org/events.shtml
*Vancouver Island Faceters' Guild - British Columbia, Canada.
wrheitland@shaw.ca

(Add your faceting organization here, US or International - Write to
( owner-lapidary@caprock-spur.com or owner-faceters@caprock-spur.com )

====================================

TODAY'S FUNNY ~

Amazing Anagrams

Dormitory == Dirty Room

Desperation == A Rope Ends It

The Morse Code == Here Come Dots

Slot Machines == Cash Lost in 'em

Animosity == Is No Amity

Snooze Alarms == Alas! No More Z's

Alec Guinness == Genuine Class

Semolina == Is No Meal

The Public Art Galleries == Large Picture Halls, I Bet

A Decimal Point == I'm a Dot in Place

The Earthquakes == That Queer Shake

Eleven plus two == Twelve plus one

Contradiction == Accord not in it

This one's amazing: [From Hamlet by Shakespeare]

To be or not to be: that is the question, whether tis nobler in the
mind to suffer the slings and arrows of outrageous fortune.

Becomes:

In one of the Bard's best-thought-of tragedies, our insistent hero,
Hamlet, queries on two fronts about how life turns rotten.

And the grand finale:

"That's one small step for a man, one giant leap for mankind." -- Neil A. Armstrong

becomes:

A thin man ran; makes a large stride; left planet, pins flag on moon! On to Mars!

=====================================

REFLECTIONS AND TIDBITS:

" Today is the best day of your life
Because it is the day that you have not seen."

--- Author Unknown ---

=====================================
BUSINESS SECTION:
=====================================
CLASSIFIED ADVERTISEMENTS:

Subject: CLASSIFIED ADVERTISEMENTS:
Date: Wed, 4 Dec 2002 16:40:35 EST
To: lapidary@caprock-spur.com
From: ACMEMINER2@aol.com

Howdy Folks!

I have a couple items that would make a great gift for the
lapidarist/collector on your shopping list this year!

Gem display cases and a great VHS video on mining gemstones in America!
It will take you to some famous Tourmaline mines in Main and California. Red
Emerald in Utah. Sleeping Beauty mine in Arizona for Turquoise and Peridot
on the San Carlos reservation. Sunstone in Oregon and much more!

You can see my items on my specials page at this link.

http://www.topgemsgems.com/SPECIALS.html


THANK YOU....

HAPPY HOLIDAYS!

Steve

12052002
----------

Subject: Advertisement
Date: Thu, 5 Dec 2002 12:12:01 EST
To: <faceters@caprock-spur.com>
From: GEMARTSERV@aol.com

Books by Glenn and Martha Vargas : In time for CHRISTMAS

Faceting For Amateurs, Third Edtion $35
Diagrams Volume I $30
Diagrams Volume II $30
Diagrams Volume III $30
Descriptions of Gem Materials, Third Edition $25
Calif. residents please add 7.75% sales tax

Media mail rates: Fac. for Amat. $2.26
Others $1.84
Any two $3.10
Will advise on non US delivery
Contact Jerry Newman at: gemartserv@aol.com

PS regarding the Vargas Pol-A-Gem laps: They are all gone for this season.
Glenn has agreed to make more in the spring when the weather warms up in our
desert; and will make Alumina-B as well as Cerium Oxide. I will post to the
list when more become available. Thanks to all who ordered over the last few
weeks!

12052002
------------


Subject: FS
Date: Fri, 29 Nov 2002 23:15:39 -0500
To: <faceters@caprock-spur.com>
From: "Tyler Allen" <t.allen@mindspring.com>

Members:
I had a Nigerian friend of mine send me some rough that he needs to blow
out. I have two kilos of Peach colored Zircon with a little red also
mostly to cut melee but there are a lot of large stones as well in the
parcel. Also, I have 200 grams of dark blue Indicolite Tourmaline
thats needs to be heat treated, last of all a parcel of 50 grams of
assorted pink/red colored Tourmaline. Make offers.

Tyler Allen
770-393-2547

12022002
*********

Rough to Cut
If you're looking for quality facet rough please check out Rough to Cut,
http://www.roughtocut.com. We offer a wide range of quality facet rough
from Aquamarine to Zircon. Large selections in stock currently of Beryl,
Garnets & Tourmalines. Please check us out & when you do, why not give a
try to our contest, you could win a 5ct + piece of Spessartite garnet
facet rough.

Noel
Rough to Cut
http:www.roughtocut.com

11142002P
********


Subject: AD
Date: Thu, 31 Oct 2002 20:50:44 -0800
To: faceters@caprock-spur.com
From: "P. Miklik" <b-daw@pacbell.net>

AVAILABLE FOR SALE
Contact b-daw@pacbell.net

ZIRCONS
Honey, red & brown zircons, 10g parcels @$20/parcel

GARNETS
Red Garnet $8/g, eye clean-slightly included
Spessartine Garnet $7.50/g, slight-moderately included
Malaya Garnet $6/g, good eye clean roughs
Tunduri Garnet $10/g, eye clean-slightly included

TOURMALINES
Pink Tourmaline $20/g, eye clean-slightly included
Red Tourmaline $10/g, slight-moderately included
Bicolor Tourmaline $15/g, eye clean
Watermelon Tourmaline $20/g eye clean
Green/Green Blue Tourmaline $10/g, eye clean roughs

SAPPHIRES
Blue, Green & Blue/Green Sapphires $35/g, eye clean-slightly
included, up to 1g.

BERYL
Blue Beryl (Aquamarine) $6/g, eye clean-slightly included crystals
Green Beryl (Emerald) $10-$50/g, eye clean-slightly included crystals,
zoned green
Cabbing Grade Aquamarine $3/g

11012002P
********

Rock Peddler
Complete online discount catalog for cabbing and faceting machines, wheels,
laps, polishes, diamond saws, diamond blades, and general lapidary supplies
at http://www.rockpeddler.com.

09272002P
********

Gewelers Gems
e-mail: sales@jewelersgems.com
Solid copper laps 1/4 thick 8" and 6" you can charge both sides with
diamond. http://www.jewelersgems.com/faceting_laps.htm

03222002P
********

NOW ONLINE! RRGaetan Gem Rough - Featuring excellent, facet-grade,
Colombian Emerald rough! PLUS, Chrome Tourmaline, Achroite Tourmaline,
Golden Chrome Tourmaline, Aquamarine, Spess, Mint and Malaya Garnets,
and more! For photos and more information, visit us at rrgaetan.com.

11242002RP
********

===================================

COMPETITIONS:

For All National and International Masters, Past-Masters and
World-Class Cutters:

This post is simply a reminder that in 2003 the USFG will host its
first National and International Faceting Competition. It is called
the North American Faceting Challenge -- 'NAFC.' Since the designs
and rules were first published in the 2001 September Issue of the
USFG's Newsletter, and since they have not been published since 2001,
some of you, who are most capable - skill-wise, may not
know about the competition, and some of you may have forgotten. The
"NAFC" is an OPEN Competition. Please note: The designs and rules
can be downloaded at <http://www.usfacetersguild.org/events.shtml>.
The closing date is June 20th, 2003; the amount of time between the
present date and June 20th, 2003 should be enough for all Master
cutters to cut the two required designs -- Fred Van Sant's "Four
Star," and Charles Covill's "Wind Wheel No. 2." If further
information is needed, please contact me at <clmoon@pacbell.net>.

Charlie Moon

*****

Subject: First USFG faceting list design competition.
Date: Thu, 21 Nov 2002 16:29:21 -0800
To: faceters@caprock-spur.com
From: Dan Clayton <dclayton@speakeasy.org>

First USFG faceting list design competition.

Design: Hexagon or Hexagon Cushion in Colorless or Colored Topaz

Judging: Highest number for total ISO values at 0, 10, 20,30, 40
and 50 degree tilt with five degree head shadow in GemFramx will
win. Example parameters are given below to achieve this configuration.
Online designs must be submitted by January 10, 2003. Design and
cut entries should have the design posted by that date but stone judging
will take place at the OPLC Hobnob in Tucson in February 2003.

Publication: All entries will be posted on the USFG faceting list site
and possibly on the USFG site as well. Designs may be included in
a USFG list CD. Designers maintain copyright to their designs but
must allow posting on the USFG faceting list site. Posting or publishing
elsewhere is not only permitted but encouraged.

Followup: Additional contests may be held for other shapes and
materials if there is sufficient interest and participation.

RI 1.61
head shadow 5 degrees
ignore glare no (default)
tilt movie yes (default)
starting tilt direction 0
ending tilt direction 5 (default)
maximum tilt angle 50
tilt increment 10
suppress VGA no (default)
concave no (default)
COS files no (default)
ISO files no ( you can enter yes if you wish
but it will fill your disk )
DISP files no (default)
exit files no (default)
starting file # increment each run if you wish to save images

Values for ISO will be summed and used as ISO total.
ISO Total will be deciding factor in judging but there will be 30
points deducted for a missed meetpoint. Fractional

Special recognition will be given to most original design as determined
by team of four judges selected by Jeff Ford or delegate/s.

Classes:

Individual,
all work must be done by one individual. In the
case of a fractional indices or an incomplete design a design
coach will explain how the problem can be fixed and the
entry will be moved to Coached class.

Team/Coached,
more than one individual from a club, guild or area may work together
as a team. If an individual wishes coaching they may do so but most
work must be done by the entrant with only suggestions by coach. This
means Fred Van Sant or some other designer can not do a design that you
enter as your own. I encourage friends, club/guild members to enter as a
team. Do not hesitate to enter if you need some coaching. We have design
mentors who are happy to help you.

Modified,
for a public domain design or a copyrighted design that the copyright holder
gives you permission to use. You enter design with modified angles, new tiers
or deleted tiers which gives "optimum" performance as determined by ISO
total. We will post at least two very basic designs you can enhance as you
please.

Design and Cut,
design will be posted and ISO Total noted but beauty of the finished stone
will be the judging criteria. Stones will be judged at the OPLC Hobnob in
Tucson. Individual, Team/Coached and Modified designs will be judged
separately.


I hope this format will encourage design and optimization oldtimers and
newcomers to get involved and hopefully develop their skills. All
entries will be posted on the site and may drive some traffic and interest.
I think ISO Total is as good as any single value to evaluate design
performance but we will look to improve criteria in the future.


Dan Clayton


===================================

SHOWDATES:

~ FLORIDA


Tomoka Gem and Mineral Society's annual show will be held on Dec. 14 and 15 at
the Volusia County Fairgrounds, located on state route 44 in Deland, Florida.
Fairgrounds are 1 mile east of interstate route 4 at exit 118. We will have at
least one showcase of faceted gems done by our members. Thank you, John Withey


*****

~ CALIFORNIA


FACETERS SYMPOSIUM 2003
Presented by the Faceter's Guild of Southern California
At the Seaside GEMboree AFMS/CFMS Convention & Show
Ventura, California June 6-7-8, 2003


You are invited to participate in the Faceters
Symposium 2003 which will be held at the Seaside Park
(Ventura Fairgrounds) at Ventura, California during the
AFMS/CFMS Convention & Show. The Faceters Symposium dates
are June 6th, 7th, & 8th. That is Friday, Saturday, &
Sunday. The CFMS GEMboree is on those dates as well as on
Thursday the 5th of June. All of this is at the same
location, just a hundred yards from the beach.

The Faceters Symposium will feature ten speakers, who
will have presentations covering various parts of gemstone
faceting interests. A Hospitality Hour on Friday evening
and a Saturday Awards Luncheon are also part of the
Symposium. There will be competitions at the Novice,
Advanced, & Masters levels. Get started on your
competition entry soon.

The CFMS GEMboree itself will have buildings that have
exhibits on display, dealers with their wares to offer,
demonstrators to show how it is done, and speakers with
presentations covering other lapidary fields of interest.

For information & costs regarding the Faceters
Symposium (including competition information), your contact
is listed below. Ask for one of the Packets. Be sure to
state your snail mailing address so that a Packet can be
mailed to you.

Glenn Klein, Chairman
24001 Muirlands Blvd., Space #79
Lake Forest, CA 92630 email: glennklein@yahoo.com


~TENNESSEE

The Middle Tennessee Gem & Mineral Society, Inc. announces their
22nd annual "Earth Treasures" Jewelry, Gem, Mineral and Fossil Show.
There will be door prizes, auctions, exhibits, demonstrations and 30
dealers from around the US.

The MTG&MS is a not-for-profit educational society, made up of local
members from around Middle Tennessee, interested in the study, collection
and understanding of minerals, the earth's geological history, jewelry
making, and the polishing of gem stones. The profit from this annual
show and sale go to fund nine (9) scholarships at regional universities,
along with two Tennessee Elementary Schooll Earth Science projects
and two middle Tennessee Senior Citizens workshop programs.

Date: December 14-15, 2002

Time: 9 AM-6 PM Saturday & 10 AM-5 PM Sunday

Place: Creative Arts Building, Tennessee State Fairgrounds, Nashville, Tennessee

Admission: $2.00 Adults, $0.50 High School Students, Under 12 free with an adult

Contact: Will Smith (615) 366-1022 Show Chairperson

Web Site: www.mtgms.org Email: willsmith.2@comcastnet

Exhibits: Show cases of Fossils, Minerals, Jewelry, cut and polished gemstones

Including local Elmwood minerals from the zinc mines at Carthage and beautiful
Tennessee Paint Rock Agate from the mountains of Middle Tennessee

Demonstrations: Silversmithing, beading, wire wrapping, flint knapping and faceting

Other activities: Hourly door prizes and silent auctions

Dealers will offer:

Gold and silver jewelry, mountings and repair

Colored gem stones & diamonds, loose or mounted in jewelry

Crystals and minerals from around the world including our local-world renowned
golden calcites from Carthage

Fossils and artifacts including dinosaur life, marine life and prehistoric arrowheads,
along with modern flint knapping

Tools and supplies for the above

Feel free to call if you have any questions. We appreciate your help and support.


~VIRGINIA

Roanoke Valley Mineral & Gem Society - 22nd Annual Show at the
Salem Civic Center, Salem, VA 11/29-12/1/02. Thanks,Larry White

===================================


LAPIDARY ARTS and FACETERS DIGEST PERSONALS:


KANSAS: If anyone in the central portion of the country from Oklahoma city
to Wichita to Kansas City would be interested in forming something like the
Flatland Facet Guild or some such name give me a line at
faceter@bigfoot.com
Larry W. Davis
******

ILLINOIS - MISSOURI (Central Area, hubed around St. Louis, Missouri) A
group of 4 faceters have met and we had a great time. We intend to meet
again and would like to have fellow faceters join our group. I received an
email from another Newbie that expressed interest in attending our next get
together. Faceters from any and all areas are welcome... It's swell to meet
personally and exchange tips and hints! COME JOIN OUR GROUP! It's FREE! ;o)
Doug Smith, Alton, IL .at: gembin@spiff.net
******

INDIANA: I moved to Valparaiso, (Northwest) Indiana, about three years ago.
Are there any clubs in this area? or is there anyone interested in starting
one? I do faceting and some cabbing. Not much here but cornfields. Nice
scenery, but I get sooooooo lonely. LOL Let me know. (Bill) "William
J.Pysnack" <wjpin@home.com>
******

S.E. LOUISIANA: Anyone in or around the New Orleans, LA area wishing to
form a club or have get togethers for faceting, discussions, cabbing,
procurement, etc. Please contact me via email @ tbird@bayouself.org. (Thom
Bird - Chalmette, LA)
*****

MISSISSIPPI: If anyone is near Meridian Mississippi and would be interested
in forming some kind of club or just get together with faceting and/or
cabbing please e-mail me at jennings@netdoor.com Thanks, Jim
*****

TEXAS: Anyone in the Corpus Christi or Coastal Bend area that is interested
in starting a local faceter's guild contact me at: hankswan@earthlink.net or
gemscc@msn.com or telephone 361-857-2405 (days) or 361-992-1296
(evenings).Hank swan
******

WASHINGTON DC.(Rockville Md area) Looking for folks to get together
occasionally to facet. I have just started faceting and am also interested
in sphere making (infinate # of facets) Robert Winfield
winfielr@inra.nimh.nih.gov
******

=============================================
Lurking is fine, but participation is more fun!! Get involved!!
=============================================

LAPIDARY ARTS and FACETERS DIGEST Staff ~

Thurmond Moore III/ Moderator
owner-faceters@caprock-spur.com

Fred Ward / Moderator - Gemology
fward@erols.com.

Tempie Francis, Attorney at Law / Legal Advisor

==============================================
==============================================

The LAPIDARY ARTS and FACETERS DIGEST is never sent unsolicited.
You are receiving it because you subscribed to it at our digest subscription page at:

http://dns2.caprock-spur.com:81/guest/RemoteListSummary/LapidaryArtsDigest

To unsubscribe, just use the link below and follow the instructions there:

http://dns2.caprock-spur.com:81/guest/RemoteListSummary/LapidaryArtsDigest


==============================================
List Policy: http://www.gemcutters.org/rules.htm
==============================================
Share your love of lapidary with a friend!
==============================================