LAPIDARY ARTS and FACETERS DIGEST
committed to carrying on the fine works started
by Hale Sweeny and Jerry Dewbre
Issue No.20 - Wednesday December 4, 2002
Click a link below to post to the list:
for faceting questions firstname.lastname@example.org
for lapidary questions email@example.com
List Posting Guidelines and rules can be found at:
Web Site http://www.gemcutters.org
Published Monday thru Friday, except holidays
The Lapidary Arts Digest is moderated by:
Thurmond Moore III & Fred Ward (Gemology)
From the Moderator: No message today.
Index to Today's Digest
01 AMBER ROUGH SOURCE
02 Re: Zircon and Tourmaline FS
03 Re: Faceters Symposium
04 Ultra Tech Indicator
Business Section - No messages today.
Subject: AMBER ROUGH SOURCE
Date: Tue, 3 Dec 2002 16:06:28 -0500
From: "7genex7" <firstname.lastname@example.org>
Hi everyone -- I'm looking for a good source for amber rough --
let me know if you know of one.
Subject: Nigerian rough
Date: Tue, 3 Dec 2002 17:19:10 -0500
To: "faceter's digest" <email@example.com>
From: "Doug Dover" <firstname.lastname@example.org>
I heartily agree with Carl that if you know how much your friend
get from the rough, plus a slight bump for your trouble, it would
easier to sell. I would be interested in a small parcel containing
each of the materials as I am sure many other here would also be.
Subject: Faceters Symposium 2003
Date: Tue, 3 Dec 2002 15:59:33 -0800 (PST)
To: LAPIDARY ARTS FACETERS DIGEST <email@example.com>
From: Glenn Klein <firstname.lastname@example.org>
Recently, I announced that Fred Van Sant will be attending
as our special guest.
Today, the second of our two special guests that will be
attending the Faceters Symposium 2003 at Ventura next June,
Glenn Vargas, has confirmed to me his intention of being
there, and he will be available for any faceter who wishes
to speak with him. Glenn is looking forward to mixing with
the faceters once again. He will also be one of the
members of our Panel of Experts presentation during the
In addition to our two special guests, we will have nine
speaker-presentations, the Hospitality Hour, and the Awards
Luncheon. As it looks now, there will be at least ten
cases of faceted stones on display in the main Show exhibit
area. That will be the most faceting cases I have seen in
many a year. And, at the close of the Symposium on Sunday.
I offered, and the BOARD has accepted, so the USFG Officers
will hold a meeting for the general members in the
Symposium room. The USFG meeting is open for members or
any other faceters interested in attending. WOW...what a
Glenn Vargas' main fine collection of crystals and gems cut
of those crystal species and varieties is permanently
located at the University in Texas where Glenn and Martha
taught for so many years. But Glenn intends to bring some
of his cut gems for display, to the tune of two four foot
cases of them.
Glenn also tells me that he is almost ready to release the
fourth edition of his fantastic book FACETING FOR AMATEURS.
He definitely will have it ready by May, or even sooner.
I have a copy of his first edition (1969...which is totally
worn out from my use), and I have a copy of his second
edition (1977), and his third edition (1989). I am looking
forward to having a copy of the new fourth edition as well.
If any of you want a copy of his present third edition, I
would buy one now, because they will soon not be available.
December 3, 2002 For Information: email@example.com
Ask for the packet,
Glenn Klein, Chairman give your mailing
Faceters Symposium 2003 address.
Subject: Ultra Tech Indicator
Date: Tue, 3 Dec 2002 23:30:50 -0500
From: "Roy Auerbach" <firstname.lastname@example.org>
I just got a used left handed Ultra-Tec and was looking for a dial
indicator. There are none to be found. Others have suggested I get
Beale-Wooley indicator and I have started to assemble the parts
this. I noticed that you can buy something that looks very similar
this from MDR for their faceting machine. The cost is something
Does anyone know if the MDR device could be used on another faceting
machine like the Ultra-Tec?
RESOURCES FOR LAPIDARIES ~
Hale Sweeny's Lapidary Digest Archives http://www.lapidarydigest.com/
International Lapidary Association http://www.gemcutters.org
RESOURCES FOR FACETER'S ~
Fac-Ette Manufacturing Company: (910)256-9248
Raytech Industries: http://www.raytech-ind.com
Rock Peddler: 1-800-416-4348 / www.rockpeddler.com
RESOURCES FOR GEMOLOGISTS ~
Accredited Gemologists Association, http://aga.polygon.net/
American Gem Society, (AGS) 702-255-6500
American Gem Trade Association, (AGTA) http://www.agta.org
Gemmological Assc. & GTL / Great Britain, http://www.gagtl.ac.uk/gagtl
Gemmological Association of Australia, http://www.gem.org.au
Gemological Institute of America, (GIA) http://www.gia.edu.giagem
International Gem Society (IGS) web site is: http://www.gemsociety.org
International Colored Gemstone Association, http://www.gemstone.org
FACETING GUILDS (Alphabetically, World) ~
*Charleston Faceting Guild, South Carolina, email@example.com.
*Columbia-Willamette Faceter's Guild, http://www.facetersguild.com/
*Danish Faceters Guild, http://medlem.spray.se/danfacet/
*East/Central Florida:Tomoka Gem and Mineral Society's Faceters
Don Cameron: firstname.lastname@example.org
*Eastern Mass Faceter's Group, email@example.com
*Faceter's Forum Society-LaPorte, IN VESteele@aol.com
*Faceter's Guild of N. California, Wayne Meissner, firstname.lastname@example.org
*Faceter's Guild of S. California, Jerry W. Carroll, (818)348-6327
*Intermountain Faceter's Guild, Carl M. Unruh, (360)385-3753
*Midwest Faceter's Guild, E-mail: email@example.com
*Mid-Williamette Faceters Guild, Albany, Oregon, Michael E. Bumcrot;
E-mail @ MBumcrot@valleyoilco.com
*Moreton Bay is a branch of the Australian Facetors' Guild, Brisbane,
*New Mexico Faceter's Guild, Nancy Attaway, firstname.lastname@example.org
*North Puget Sound Faceting Guild, Keith Wyman, email@example.com
*Tacoma Faceting Guild, Chuck Bloch firstname.lastname@example.org
*Texas Faceter's Guild, Jill Rowlands, email@example.com
*Seattle Faceting Club (LeonardBahr@prodigy.net)
*United States Faceting Guild (Keith Wyman, firstname.lastname@example.org)
*Vancouver Island Faceters' Guild - British Columbia, Canada.
(Add your faceting organization here, US or International - Write
( email@example.com or firstname.lastname@example.org
TODAY'S FUNNY ~
HOW TO IDENTIFY WHERE A DRIVER IS FROM
One hand on wheel, one hand on horn CHICAGO
One hand on wheel, middle finger out window NEW YORK
One hand on wheel, middle finger out window, cutting across 4 lanes
traffic NEW JERSEY
One hand on wheel, one hand on newspaper, foot solidly on accelerator
One hand on wheel, one hand on nonfat double decaf cappuccino,
cell phone, brick on
accelerator, gun in lap LOS ANGELES
Both hands on wheel, eyes shut, both feet on brake, quivering in
OHIO, (but driving in LOS
Both hands in air, gesturing, both feet on accelerator, head turned
talk to someone in back seat
One hand on 12oz. double shot latte, one knee on wheel, cradling
phone, foot on brake, mind on
radio game, banging head on steering wheel while stuck in traffic
One hand on wheel, one hand on hunting rifle, alternating between
feet being on the accelerator
and both feet on brake, throwing McDonald's bag out the window TEXAS
Four-wheel drive pick-up truck, shotgun mounted in rear window,
beer cans on floor, squirrel tails
attached to CB antenna OKLAHOMA
Two hands gripping wheel, blue hair barely visible above windshield,
driving 35 on the Interstate in the
left lane with the left blinker on FLORIDA
REFLECTIONS AND TIDBITS:
" Don't try to get even...get ahead !"
--- Author Unknown ---
Date: Fri, 29 Nov 2002 23:15:39 -0500
From: "Tyler Allen" <email@example.com>
I had a Nigerian friend of mine send me some rough that he needs
out. I have two kilos of Peach colored Zircon with a little red
mostly to cut melee but there are a lot of large stones as well
parcel. Also, I have 200 grams of dark blue Indicolite Tourmaline
thats needs to be heat treated, last of all a parcel of 50 grams
assorted pink/red colored Tourmaline. Make offers.
Rough to Cut
If you're looking for quality facet rough please check out Rough
http://www.roughtocut.com. We offer a wide range of quality facet
from Aquamarine to Zircon. Large selections in stock currently of
Garnets & Tourmalines. Please check us out & when you do,
why not give a
try to our contest, you could win a 5ct + piece of Spessartite garnet
Rough to Cut
Date: Thu, 31 Oct 2002 20:50:44 -0800
From: "P. Miklik" <firstname.lastname@example.org>
AVAILABLE FOR SALE
Honey, red & brown zircons, 10g parcels @$20/parcel
Red Garnet $8/g, eye clean-slightly included
Spessartine Garnet $7.50/g, slight-moderately included
Malaya Garnet $6/g, good eye clean roughs
Tunduri Garnet $10/g, eye clean-slightly included
Pink Tourmaline $20/g, eye clean-slightly included
Red Tourmaline $10/g, slight-moderately included
Bicolor Tourmaline $15/g, eye clean
Watermelon Tourmaline $20/g eye clean
Green/Green Blue Tourmaline $10/g, eye clean roughs
Blue, Green & Blue/Green Sapphires $35/g, eye clean-slightly
included, up to 1g.
Blue Beryl (Aquamarine) $6/g, eye clean-slightly included crystals
Green Beryl (Emerald) $10-$50/g, eye clean-slightly included crystals,
Cabbing Grade Aquamarine $3/g
Complete online discount catalog for cabbing and faceting machines,
laps, polishes, diamond saws, diamond blades, and general lapidary
Solid copper laps 1/4 thick 8" and 6" you can charge both
NOW ONLINE! RRGaetan Gem Rough - Featuring excellent, facet-grade,
Colombian Emerald rough! PLUS, Chrome Tourmaline, Achroite Tourmaline,
Golden Chrome Tourmaline, Aquamarine, Spess, Mint and Malaya Garnets,
and more! For photos and more information, visit us at rrgaetan.com.
For All National and International Masters, Past-Masters and
This post is simply a reminder that in 2003 the USFG will host
first National and International Faceting Competition. It is called
the North American Faceting Challenge -- 'NAFC.' Since the designs
and rules were first published in the 2001 September Issue of the
USFG's Newsletter, and since they have not been published since
some of you, who are most capable - skill-wise, may not
know about the competition, and some of you may have forgotten.
"NAFC" is an OPEN Competition. Please note: The designs
can be downloaded at <http://www.usfacetersguild.org/events.shtml>.
The closing date is June 20th, 2003; the amount of time between
present date and June 20th, 2003 should be enough for all Master
cutters to cut the two required designs -- Fred Van Sant's "Four
Star," and Charles Covill's "Wind Wheel No. 2." If
information is needed, please contact me at <email@example.com>.
Subject: First USFG faceting list design competition.
Date: Thu, 21 Nov 2002 16:29:21 -0800
From: Dan Clayton <firstname.lastname@example.org>
First USFG faceting list design competition.
Design: Hexagon or Hexagon Cushion in Colorless or Colored Topaz
Judging: Highest number for total ISO values at 0, 10, 20,30, 40
and 50 degree tilt with five degree head shadow in GemFramx will
win. Example parameters are given below to achieve this configuration.
Online designs must be submitted by January 10, 2003. Design and
cut entries should have the design posted by that date but stone
will take place at the OPLC Hobnob in Tucson in February 2003.
Publication: All entries will be posted on the USFG faceting list
and possibly on the USFG site as well. Designs may be included in
a USFG list CD. Designers maintain copyright to their designs but
must allow posting on the USFG faceting list site. Posting or publishing
elsewhere is not only permitted but encouraged.
Followup: Additional contests may be held for other shapes and
materials if there is sufficient interest and participation.
head shadow 5 degrees
ignore glare no (default)
tilt movie yes (default)
starting tilt direction 0
ending tilt direction 5 (default)
maximum tilt angle 50
tilt increment 10
suppress VGA no (default)
concave no (default)
COS files no (default)
ISO files no ( you can enter yes if you wish
but it will fill your disk )
DISP files no (default)
exit files no (default)
starting file # increment each run if you wish to save images
Values for ISO will be summed and used as ISO total.
ISO Total will be deciding factor in judging but there will be 30
points deducted for a missed meetpoint. Fractional
Special recognition will be given to most original design as determined
by team of four judges selected by Jeff Ford or delegate/s.
all work must be done by one individual. In the
case of a fractional indices or an incomplete design a design
coach will explain how the problem can be fixed and the
entry will be moved to Coached class.
more than one individual from a club, guild or area may work together
as a team. If an individual wishes coaching they may do so but most
work must be done by the entrant with only suggestions by coach.
means Fred Van Sant or some other designer can not do a design that
enter as your own. I encourage friends, club/guild members to enter
team. Do not hesitate to enter if you need some coaching. We have
mentors who are happy to help you.
for a public domain design or a copyrighted design that the copyright
gives you permission to use. You enter design with modified angles,
or deleted tiers which gives "optimum" performance as
determined by ISO
total. We will post at least two very basic designs you can enhance
Design and Cut,
design will be posted and ISO Total noted but beauty of the finished
will be the judging criteria. Stones will be judged at the OPLC
Tucson. Individual, Team/Coached and Modified designs will be judged
I hope this format will encourage design and optimization oldtimers
newcomers to get involved and hopefully develop their skills. All
entries will be posted on the site and may drive some traffic and
I think ISO Total is as good as any single value to evaluate design
performance but we will look to improve criteria in the future.
Tomoka Gem and Mineral Society's annual show will be held on Dec.
14 and 15 at
the Volusia County Fairgrounds, located on state route 44 in Deland,
Fairgrounds are 1 mile east of interstate route 4 at exit 118. We
will have at
least one showcase of faceted gems done by our members. Thank you,
FACETERS SYMPOSIUM 2003
Presented by the Faceter's Guild of Southern California
At the Seaside GEMboree AFMS/CFMS Convention & Show
Ventura, California June 6-7-8, 2003
You are invited to participate in the Faceters
Symposium 2003 which will be held at the Seaside Park
(Ventura Fairgrounds) at Ventura, California during the
AFMS/CFMS Convention & Show. The Faceters Symposium dates
are June 6th, 7th, & 8th. That is Friday, Saturday, &
Sunday. The CFMS GEMboree is on those dates as well as on
Thursday the 5th of June. All of this is at the same
location, just a hundred yards from the beach.
The Faceters Symposium will feature ten speakers, who
will have presentations covering various parts of gemstone
faceting interests. A Hospitality Hour on Friday evening
and a Saturday Awards Luncheon are also part of the
Symposium. There will be competitions at the Novice,
Advanced, & Masters levels. Get started on your
competition entry soon.
The CFMS GEMboree itself will have buildings that have
exhibits on display, dealers with their wares to offer,
demonstrators to show how it is done, and speakers with
presentations covering other lapidary fields of interest.
For information & costs regarding the Faceters
Symposium (including competition information), your contact
is listed below. Ask for one of the Packets. Be sure to
state your snail mailing address so that a Packet can be
mailed to you.
Glenn Klein, Chairman
24001 Muirlands Blvd., Space #79
Lake Forest, CA 92630 email: email@example.com
The Middle Tennessee Gem & Mineral Society, Inc. announces
22nd annual "Earth Treasures" Jewelry, Gem, Mineral and
There will be door prizes, auctions, exhibits, demonstrations and
dealers from around the US.
The MTG&MS is a not-for-profit educational society, made up
members from around Middle Tennessee, interested in the study, collection
and understanding of minerals, the earth's geological history, jewelry
making, and the polishing of gem stones. The profit from this annual
show and sale go to fund nine (9) scholarships at regional universities,
along with two Tennessee Elementary Schooll Earth Science projects
and two middle Tennessee Senior Citizens workshop programs.
Date: December 14-15, 2002
Time: 9 AM-6 PM Saturday & 10 AM-5 PM Sunday
Place: Creative Arts Building, Tennessee State Fairgrounds, Nashville,
Admission: $2.00 Adults, $0.50 High School Students, Under 12 free
with an adult
Contact: Will Smith (615) 366-1022 Show Chairperson
Web Site: www.mtgms.org Email: willsmith.2@comcastnet
Exhibits: Show cases of Fossils, Minerals, Jewelry, cut and polished
Including local Elmwood minerals from the zinc mines at Carthage
Tennessee Paint Rock Agate from the mountains of Middle Tennessee
Demonstrations: Silversmithing, beading, wire wrapping, flint knapping
Other activities: Hourly door prizes and silent auctions
Dealers will offer:
Gold and silver jewelry, mountings and repair
Colored gem stones & diamonds, loose or mounted in jewelry
Crystals and minerals from around the world including our local-world
golden calcites from Carthage
Fossils and artifacts including dinosaur life, marine life and
along with modern flint knapping
Tools and supplies for the above
Feel free to call if you have any questions. We appreciate your
help and support.
Roanoke Valley Mineral & Gem Society - 22nd Annual Show at
Salem Civic Center, Salem, VA 11/29-12/1/02. Thanks,Larry White
LAPIDARY ARTS and FACETERS DIGEST PERSONALS:
KANSAS: If anyone in the central portion of the country from Oklahoma
to Wichita to Kansas City would be interested in forming something
Flatland Facet Guild or some such name give me a line at
Larry W. Davis
ILLINOIS - MISSOURI (Central Area, hubed around St. Louis, Missouri)
group of 4 faceters have met and we had a great time. We intend
again and would like to have fellow faceters join our group. I received
email from another Newbie that expressed interest in attending our
together. Faceters from any and all areas are welcome... It's swell
personally and exchange tips and hints! COME JOIN OUR GROUP! It's
Doug Smith, Alton, IL .at: firstname.lastname@example.org
INDIANA: I moved to Valparaiso, (Northwest) Indiana, about three
Are there any clubs in this area? or is there anyone interested
one? I do faceting and some cabbing. Not much here but cornfields.
scenery, but I get sooooooo lonely. LOL Let me know. (Bill) "William
S.E. LOUISIANA: Anyone in or around the New Orleans, LA area wishing
form a club or have get togethers for faceting, discussions, cabbing,
procurement, etc. Please contact me via email @ email@example.com.
Bird - Chalmette, LA)
MISSISSIPPI: If anyone is near Meridian Mississippi and would be
in forming some kind of club or just get together with faceting
cabbing please e-mail me at firstname.lastname@example.org Thanks, Jim
TEXAS: Anyone in the Corpus Christi or Coastal Bend area that is
in starting a local faceter's guild contact me at: email@example.com
firstname.lastname@example.org or telephone 361-857-2405 (days) or 361-992-1296
WASHINGTON DC.(Rockville Md area) Looking for folks to get together
occasionally to facet. I have just started faceting and am also
in sphere making (infinate # of facets) Robert Winfield
Lurking is fine, but participation is more fun!! Get involved!!
LAPIDARY ARTS and FACETERS DIGEST Staff ~
Thurmond Moore III/ Moderator
Fred Ward / Moderator - Gemology
Tempie Francis, Attorney at Law / Legal Advisor
The LAPIDARY ARTS and FACETERS DIGEST is never sent unsolicited.
You are receiving it because you subscribed to it at our digest
subscription page at:
To unsubscribe, just use the link below and follow the instructions
List Policy: http://www.gemcutters.org/rules.htm
Share your love of lapidary with a friend!